Hybrid Capacitor Products



STUD MOUNTING FOR THQ SERIES HYBRID CAPACITORS

THQ Hybrid Capacitors are available with threaded mounting studs welded directly to the leaded end of the case.  These studs, suitable for insertion into pre-drilled circuit board, provide rigid support and stability for Hybrid capacitor assembly. Studs (Item 1 in sketch) are #2 -56 CDA 752, with several lengths available.  The Stud layout is centered on the positive lead, 90˚ to the negative lead, with 0.80" (Dim. 'B') spacing. Stud assembly withstands 50# pull test without failure or distortion of the case.    Studs are available on any rating THQ1, THQ3, THQ4, THQ5, Series Hybrid Capacitors.

Nuts (MS35649-224 are 303 Stainless Steel) and optional 303 Stainless Steel spacers (see link to dwg, below) are provided with studs.

Part Numbers: see chart below

   Stud Layout Drawing & mounting instructions

PWB layout for holes

Spacer drawing

Hybrid Capacitor Ratings and Specifications

"Product Overview"

 
 
Part Numbers and Stud Configurations
Part Numbers

Suffix
Stud length (Dim A)
THQ1XXXXXX-SMXX
SM00
0.22 inch
THQ2XXXXXX-SMXX
SM01
0.28 inch
THQ3XXXXXX-SMXX
SM02
0.41 inch
THQ4XXXXXX-SMXX
SM03
0.16 inch
THQ5XXXXXX-SMXX
SM04
0.19 inch


SM05
0.36 inch


Copyright 2010 Evans Capacitor Company. All rights reserved.